设备维修工程师 - 九江_空气化工产品（中国）投资有限公司

主要岗位职责：
1. 负责所有压缩机、汽轮机、鼓风机、膨胀机、泵、压力容器、储罐、溢流阀、交换器、管道、火炬检测、生命保障系统、关键安全系统等机械系统的维修。
2. 支持检查计划，规范设计，法规遵从，质量控制标准，设备维修和服务适应性。
3. 在PSM和MIQA手册的指导下，协助制定检验计划和维修程序。
4. 将公司标准以及“公认和普遍接受的良好工程实践”(如ASME和GB规范和API文档)解释到现场。
5. 执行设备设计、检验、服务适用性评估和机械完整性系统失效分析，制定和更新公司标准。
6. 实施和管理工程要求，以满足设备选择，维护和可靠性计划。
7. 在工厂停机/正常运行期间检查压力系统(包括压力容器，热交换器，燃烧加热器，转化炉，储罐，炉，管道)，并评估建议维修的结果，为开发和维护压力系统标准，程序，***实践，检查合同和承包商服务提供意见。
8. 在故障排除和所有相关的维护工作或支持工作中提供实际的技术技能。
9. 执行预防性维护工作并支持MI工作的实施，如SAP PM01-03任务，故障排除，维修所有负责的设备。
10. 协调或协助监督承包商在工厂或车间的工作，以确保安全、质量和可靠性。
11. 通过改进工作流程和设备性能，不断提高生产力和成本节约。启动和实施CI(持续改进)节约项目。
12. 报告-每周录入时间，准备书面或通过资源管理系统录入的技术报告，以保持工厂文件的准确性，并为组织内其他人员有效履行职责提供信息。
13. 提供机械系统诊断服务，使用振动诊断工具和故障分析技术解决机械故障。这包括发布故障分析报告和提高可靠性的成本效益建议。
14. 制定机械设备大修作业包。
15. 启动和实施可靠性和/或效率改进计划和操作机械的***实践，并专注于CONC。
16. 为大型机械提供安装和调试支持，如压缩机，膨胀机，涡轮机等。
17. 参与计划和执行小停工和大停工。在停机期间提供技术支持和实际操作支持。
18. 备件库存审查和备件采购技术支持，努力提高工厂的可靠性。
19. 及时了解和评估新的方法和工作实践，以便在工厂内应用和使用。
20. 协助制定、实施和定期审查预防性/预测性维护计划，以减少计划外停机，提高工厂的整体生产能力。
21. 根据实际需要，可安排区域内出差。
工作要求：
1. 工作地点:江西九江
2. 学历:机械或机械工程专业大专以上学历。
3. 工作经验:机械/机械工程师职位的最低要求是在压缩机，汽轮机，鼓风机，膨胀机，压力容器，储罐，管道和焊接技术方面有5年以上的经验。有大型机械检修和管道应力分析经验者优先。
4. 必须有实际工作经验。
5. 具有重大停工支持，项目工作，工厂运营和维护工作经验。
6. 熟悉供应商合同，熟悉区域内的店铺支持。
7. 能够独立工作和团队合作。
8. 对工作的态度和热情。
PRINCIPAL ACCOUNTABILITIES
1. Responsible for the maintenance of all compressors, steam turbine, blower, expander, pump，pressure vessels, tanks, relief valves, exchangers, pipeline, flare detections, life support system, critical safety system and other mechanical system.
2. Support in inspection planning, code design, regulatory compliance, quality control standard, equipment repair, and fitness for service.
3. Support to develop Inspection Planning and Repair Procedure under the guidance from PSM and MIQA manuals.
4. Interpretation of corporate standards as well as “recognized and generally accepted good engineering practices” such as ASME and GB Codes and API Documents to sites.
5. Performing equipment design, inspection, fitness for service evaluations and failure analysis for mechanical integrity system Development and updating of corporate standards.
6. Implement and manage engineering requirements to satisfy equipments selection, maintenance and reliability initiatives.
7. Inspect Pressure Systems (including Pressure Vessels, Heat Exchangers, Fired Heaters, Reformers, Storage Tanks, furnace, Piping) during plant outages / normal operation and evaluate results for recommend repair, Input for development and maintenance of Pressure System standards, procedures, best practices, inspection contracts and contractor service.
8. Provide hand-on technical skills at the troubleshooting and all related maintenance work or supporting work responsible.
9. Perform preventive maintenance work and support to implement MI work, such as SAP PM01-03 tasks, troubleshooting, repair for all responsibly equipments.
10. Coordinate or assist of supervision the contractor’s work in the facility or shop to guarantee safety and quality and reliability.
11. Continually to drive productivity and cost savings and enhancement through improved work process and equipment performance. Initiate and Implement CI (continuous improvement) savings projects.
12. Reporting-Time entry weekly and prepare technical reports either written or through entries into the resource management system to maintain accurate documentations on the plants, and to provide information for others in the organization to carry out their responsibilities effectively.
13. Provide mechanical system diagnostics services in troubleshooting and resolving machinery issues using vibration diagnostics tools and failure analysis techniques. This includes issuing failure analysis reports and cost-effective recommendations for reliability improvements.
14. Develop mechanical equipment job-packs for major overhauls and repair.
15. Initiate and implement reliability and/or efficiency improvement initiatives and best practices on operating machinery and focus on CONC.
16. Provide installation and commission support for large machinery, e.g. compressors, expander, turbines, etc.
17. Participate in the planning and execution of minor and major shutdowns. Provide technical and hands on support as required during shutdowns.
18. Spare parts inventory review and parts purchasing support technically, effort in plant reliability improvement.
19. Keep abreast of and evaluate new methodologies, work practices, for application and use within the plant.
20. Assist in the development, implementation, and periodic review of preventative/predictive maintenance programs to reduce unplanned shutdowns and improve overall plant on stream capability.
21. Business travel within region is required based on the actual need.
JOB REQUIREMENTS
1. Work location: Jiujiang, Jiangxi
2. Educational: College degree or above in Mechanical/Machinery Engineering.
3. Working Experience: The minimum requirements for the machinery/mechanical engineer’s position are 5+ years’ experience in compressor, steam turbine, blower, expander, pressure vessel,

职位要求

职位描述

相似职位推荐